7429
err 0x70
-------------------
transcend 8g
jetflash 350
-------------------
The kernel settings (uimage) seem to be incorrect
7429
err 0x70
-------------------
transcend 8g
jetflash 350
-------------------
The kernel settings (uimage) seem to be incorrect
Geändert von sadaghiani (27.10.2019 um 09:59 Uhr)
@setifstar:If the display stays at boot, the USB kernel starts but cannot read rootfs.img. In my experience it is very hard to find a USB stick that works 100% of the time. Usually I have more success after several power ups: sooner or later the kernel does not switch off the USB power and the whole lot starts up. Use older USB sticks of 512 MByte to 2Gbyte in capacity to get the best results.
@sadaghiani: If have tested the flash version and it flashes perfectly, it also starts up the way it is intended. My gut feeling says you are trying to flash the USB uImage into flash memory: this will not fit and indeed yield a correct Err 0x70. Please read the installation instructions carefully.
Regards,
Audioniek.
Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark TripleX, Amiko Alien 2+, Sogno Spark Revolution, Kathrein UFS910(1 & 14W)/912/913/922(CX24116 & AVL2108 tuners), Vizyon revolution 820HD PVR, AB IPBox 91HD/9000HD/9000HD rev.2, Xsarius Alpha HD10, nBox BKSA/BSLA/BXZB/BZZB, Vitamin HD 5000
Sats: Astra 1, 2 & 3, Hotbird
Main activity: building my own E2 images for Fortis receivers